Amending the supply and distribution schedule for the part

This page allows you to schedule the delivery for those line items whose schedule type is multiple. Tell me more.

Select the ”Amend Schedule & Distribution” link at the bottom of the “Amend Release Slip” or “Amend Terms & Conditions” page.

The “Amend Schedule & Distribution” page appears.

The system displays the following:

Date Format

The format in which the date fields are displayed in this page. This format is displayed from the "User Preferences" business component based on the login user ID. In case the format is not defined, the system displays the date format from the “Enterprise Modeling” business component by default.

The system displays the following in the “RS Details” group box.

RS #	The number that identifies the RS.
Amendment #	The latest amendment number of the RS.
Supplier Name	The name of the supplier against whom the RS is raised.
Status	The status of the RS, which could be “Amended” or “Under Amendment”.

Enter the following in the “Part Details” group box.

Line #

Use the drop-down list box to specify the line number of the part for which the schedule must be defined. The system lists all the line numbers whose schedule type is “Multiple”, in the ascending order.

Click the “Get Details” pushbutton, to retrieve the part details for the specified part.

The system displays the following fields:

Part #	The number identifying the part, whose schedule type is “Multiple”.
Part Description	The textual description of the part. Zoom facility available.
Condition	The condition of the part, which could be ”New”, “New Surplus” or ”Serviceable”.
Part Type	The type of the part.
Purchase UOM	The units of measurement of the purchased part .
Line Item Cost	The cost of the part.
Ship To	The organization unit to which the part has to be supplied.
Order Quantity	The total ordered quantity of the part to be purchased.

The system displays the following in the “Schedule Details” multiline:

Schedule #

The sequential number generated by the system, when you click the “Amend Schedule & Distribution” pushbutton.

Enter the following fields:

Schedule Qty

The required quantity of the part on a particular date (Integer). Mandatory. The quantity must be greater than zero.

Note: The quantity cannot be modified to a quantity less than the already moved quantity. Also the quantity cannot be reduced to zero. The total allocated quantity must be equal to the ordered quantity.

The schedule quantity must be greater than or equal to the minimum order quantity defined in the “Part Administration” business component.

The total schedule quantity must be equal to the ordered quantity.

The quantity can be in fractions, if fractions are allowed in the “Unit of Measurement Administration” business component.

The system displays the following:

Accepted Quantity

The quantity of parts accepted.

Enter the following fields:

Schedule Date

The date on which the required quantity must be delivered (Date Format). Mandatory. The required date must be later than or equal to the current date and the RS date.

Note: If the schedule quantity is entered, then the schedule date must be entered. You cannot modify the schedule date, if the accepted quantity is greater than zero.

Warehouse #	The number identifying the storage location, where the purchased parts have to be stored (Alphanumeric, 10). Mandatory.
	Help facility available.

Note: If the “Warehouse #” is left blank, then the warehouse mapped to the part is displayed by default.

Check the box in the “Select” column of the multiline, to mark the schedule number for deletion.
Click the “Delete” pushbutton to delete the schedule marked for deletion in the multiline.

The system regenerates the schedule number.

Click the “Amend Schedule & Distribution” pushbutton to update the schedule information entered.

The system generates the schedule number sequentially and updates the modified details. If the total scheduled quantity for the part is equal to the ordered quantity, the status is set as “Amended”. Otherwise, the status is set as “Under Amendment”.

To proceed, carry out the following

Select the “Amend Part TCD ” link at the bottom of the page, to add tax, charges and discount for the part belonging to the RS.
Select the “Amend Document TCD ” link at the bottom of the page, to add tax, charges and discount for the RS.
Select the “Amend RS – PR Coverage” link at the bottom of the page, to modify the RS-PR coverage details.
Select the “Amend Inspection Details” link at the bottom of the page, to enter the inspection details.

The system displays the following in the “Record Statistics” group box:

Created By	The name of the user who created the RS.
Created Date	The date on which the RS was created.
Last Modified By	The name of the user who last modified the RS.
Last Modified Date	The date on which the RS was last modified.
Approved By	The name of the user who approves the RS.
Approved Date	The date on which the RS was last approved.

Amending the supply and distribution schedule for the part – An overview

You can amend the supply and distribution details for the RS, which are in the “Amended” or “Under Amendment” status. On specifying the RS line number, the system displays the part details such as part description, condition of the part, total quantity ordered and the units of measurement of the parts purchased. You can distribute the quantity into various schedules by giving various supply dates and the warehouse where the parts have to be delivered.

The quantity cannot be modified to a quantity less than the already moved quantity. Also, the quantity cannot be reduced to zero. The total schedule quantity must be equal to the ordered quantity.

The system generates the schedule number sequentially when you update the details entered. The system stores the login user ID and the current server date along with the modified details.

What you can do in this page

Specify the line number to define schedules

You can specify the line number of the release to retrieve the part for which you need to enter the schedule details.

Enter the RS line number in the “Line #” field.
Click the “Get Details” pushbutton, to retrieve the part for which you need to enter the schedule details.

Note: You can enter the schedule details only for those parts whose schedule type is multiple.

Note: You can enter a value for the TCD rate, only if the TCD basis is “Flat”.