Viewing part maintenance program details

In this page you can view the part maintenance program details. The part number itself identifies the part program. You can view the part maintenance program details such as the part program status, user-defined status, revision number and the remarks for creating or modifying the part maintenance program.

Select the “View Program” link in the “Select Part #” page. Alternatively, select the hyperlinked part number in the multiline of the same page.

The “View Part Program Information” page appears.

The system displays the following field:

Date Format

The format in which the date fields appears in this page. This format is displayed from the "User Preferences" business component based on the login user ID. In case the format is not defined, the system displays the date format from the “Enterprise Modeling” business component by default.

The system displays the following fields in the “Part Details” group box:

Part #	The number identifying the part for which the maintenance program details must be viewed.
Part Description	The textual description of the part.
Maintenance Process	The maintenance process of the part, which could be “Hard-Time”, “On-Condition” or “Condition Monitoring”.
ATA #	The ATA chapter to which the part belongs.
Replacement Type	The type of replacement, which can be “LRU” (Line Replacement Unit) or “SRU” (Shop Replacement Unit) as defined in the “Aircraft” business component.

The system displays the following in the “Program Details” group box:

Program Status	The status of the part maintenance program, which could be one of the following:
	Fresh – When the part maintenance program is created
	Authorized – When the part maintenance program is authorized in the “Authorize Part Program” activity
	Revised – This indicates that a later revision number of the program exists in “Authorized” status.
User Status	The user-defined status of the part maintenance program.
Revision Count	The revision number of the part maintenance program.
Remarks	Additional remarks or comments pertaining to the modification of the part maintenance program.

The system displays the following in the “Part Removal Details” group box:

Parent Removal	The type of parent removal, which can be “Specific part”, “NHA”, “LRU-NHA”, “EIPN” or “Not Required”.
Specific Part #	The number identifying the parent part to be removed.

The system displays the following in the “Maintenance Details” multiline

Program Group	The program group under which the maintenance program for the part is classified.
Maintenance Type	The type of the maintenance activity to be performed on the part. The system displays “Overhaul”, “Repair”, “Inspection”, ”Others”, or "Retire", etc.
Work Unit #	The number identifying the task in the maintenance program to be performed on the part.
Program Item Type	The program item type of the task to be performed on the part of the maintenance program, such as Base, Block, Perpetual, As Required, Non-Block and To be Decided.
Default Exe. Priority	The default execution priority set for the task with reference to other tasks in the maintenance program planned for the part.
Initiated/Reset By	The method for ascertaining the NSV for the task, such as Self Compliance and Related Task Compliance.
Reset on Attachment?	Indicates whether to re-compute the Next Schedule Date / Next Schedule Value on attachment of the component to the aircraft. The system displays one of the following options: Not Required – Indicates that NSD / NSV is computed based on Last Performed Date / Value. First Attachment – Indicates that NSD / NSV is computed on first attachment of the component after the off-wing compliance of the task. Every Attachment – Indicates that NSD / NSV is re-computed on every attachment of the component to the aircraft.
Parent Item #	The parent task associated with the work unit planned to be executed on the part. This field id applicable only if the Program Item Type is “Block”.
Schedule Status	The schedule status of the work unit within the part maintenance program which could be “Active”, “Inactive” or "Terminated".
Maint. Operator #	The airline operator mapped to the work unit/task.
Execution Facility	Indicates the place where the work unit has to be performed. The system displays one of the following:
	In-House – Indicates that the work unit has to be performed within the company.
	Out-Source –Indicates that the component has to be given to a third party for performing the work unit
Work Center #	The number identifying the work center where the work unit has to be performed.
Time Unit	The unit of measurement of time, which could be “Minutes”, ”Hours” or “Days”.
Est. Duration	The time estimated for completing the task, standard procedure or work package.
Turn Around Time	The total time for which the component will be out of service, while it gets serviced.
On-Wing?	Indicates whether the work unit has to be performed on-wing or off-wing. The system displays either “Yes” or “No”.
Package Type	The type of package against the given task.
Ref. Document Type	The type of the reference document.
Ref Document #	The number identifying the reference document.
Ref. Document Details	The details of the reference document.
Reference EO #	The number identifying the engineering order.
Revision No	The revision number of the engineering order.
Expense Type	The expense type for the work unit that could be “Revenue” or “Capital”.
Comments	Additional remarks or comments pertaining to the inclusion of the work unit in the part maintenance program.
Work Unit Desc	The textual description of the task, standard procedure or work package.
Link Info	Indicates whether part, resource or schedule details are entered for the part maintenance program. The system displays one of the following:

	P – If part details are available
	R – If resource details are available
	S – If schedule details have been entered
	P/R – If part and resource details are available
	P/S – If part and schedule details are entered
	R/S – If resource and schedule details are entered
	P/R/S – If part, resource and schedule details are entered.

The system displays the following in the “Record Statistics” group box:

Created By	The name of the user who created the part maintenance program.
Created Date	The date on which the part maintenance program was created.
Last Modified By	The name of the user who last modified the part maintenance program.
Last Modified Date	The date on which the part maintenance program was last modified.
Authorized By	The name of the user who authorized the part maintenance program.
Authorized Date	The date on which the maintenance program was authorized.
Source	The OU that is the source of the part maintenance program information.
Owner	The OU that is the owner of the part maintenance program information.

To proceed, carry out the following: -

Select the “View Date Based Schedule” link at the bottom of the page to view the date-based schedule details for the work unit.
Select the “View Usage Based Schedule” link at the bottom of the page to view the usage-based schedule details for the work unit.

Note: These pages will get invoked only if “Shelf Life Expiry” flag is set to “No” in the “Edit Work Unit Information In Programs” page.

Select the “View Material Estimates” link at the bottom of the page to view the estimates of materials required for executing work units.
Select the “View Resource Estimates – Facilities” link at the bottom of the page to view the resources of facility type that are required for executing the work units.
Select the “View Resource Estimates – Skills” link at the bottom of the page to view the resources of still type that are required for executing the work units.
Select the “View Work Center Details” link at the bottom of the page to view the work center details.

Refer to “Viewing work center details – An overview” for more information.

Select the “View Associated Doc. Attachments” link to view documents/files associated with the part maintenance program from the common repository.