|
|
|
|
|
This page enables you to create the Fleet Campaign Directive Tell me more.
Select the “Create Fleet Campaign Directive” link under the “Engineering Document” business component.
The “Create Fleet Campaign Directive” page appears.
The system displays the following field:
|
Date Format |
The format in which the date fields must be entered in this page. This format is displayed from the "User Preferences" component based on the login user ID. In case the format is not defined, the system displays the date format from the “Enterprise Modeling” component by default. |
Enter the following fields:
|
FCD # |
A unique number identifying the fleet campaign directive (Alphanumeric, 16). This can be a combination of characters and digits. |
|
Data entry in this field is mandatory, if “FCD Numbering” is set as “No” in the “Set Options” activity. The number should be unique within the “Engineering document” business component. |
|
|
|
|
Numbering Type |
Use the drop-down list box to select the numbering type in which the FCD number must be generated. The system lists all the values defined in the “Create Numbering Class” activity of the “Document Numbering Class” business component for the “Fleet Campaign Directive” transaction. |
|
FCD Category |
Use the drop-down list box to select the category to which the FCD belongs. The system lists all the active quick codes that are of type “FCD Category” as defined in the “Create Quick Codes” activity. If you do not wish to specify the category, you can leave this field blank. |
|
User Status |
Use the drop-down list box to assign a user-defined status for the FCD. The system lists all the active quick codes that are of type “FCD User Status” as defined in the “Create Quick Codes” activity. If you do not wish to specify the user status, you can leave this field blank. |
|
Subject |
The textual description of the FCD (Alphanumeric, 255). Mandatory. |
|
ATA # |
The ATA chapter on which the FCD must be executed (Alphanumeric, 16). Mandatory. The ATA chapter number should be in “Active” status in the “Aircraft” business component. |
Enter the following field in the “Reference Document Details” group box:
|
MCM # |
The number identifying the Modification Committee Meeting (MCM) that processed the FCD (Alphanumeric, 18). |
|
MCM Date |
The date on which the MCM was convened. Ensure that the date entered here is in the format specified in the “Date Format” field. |
|
MCR # |
The number identifying the Maintenance Change Request (MCR) (Alphanumeric, 18). |
|
Help facility available. |
|
|
Revision # |
The revision number of the MCR (Alphanumeric, 40). |
|
Source Doc Type |
Use the drop-down list box to specify the type of the modification document or the source document. The system lists all the active modification document types created in the “Create MCR Document Type” of the “Common Masters” business component. |
Enter the following field in the “Other Details” group box:
|
Applicability |
Use the drop-down list box to specify whether the FCD is applicable for “Aircraft”, “Engine” or “Component”. By default this field is set to “Aircraft”. |
|
Priority |
Use the drop-down list box to assign the priority for the FCD. This indicates the level of urgency. For example, in a set of priority descriptions "Critical", "High", "Medium" and "Low", the priority description "Critical" will be treated as of highest priority. The system lists all the priority descriptions defined in the “Create Priority Numbers” activity of the “Common Masters” business component. |
|
Back Ground |
The textual description of the background information such as the prerequisites for the current change (Alphanumeric, 2000). |
|
Reason |
The textual information detailing the reason for which the FCD has been created (Alphanumeric, 255). |
Enter the following field in the “FCD Execution Details” group box:
|
Work Center # |
Use the drop-down list to select the work center where the FCD has to be performed. The system lists all the work centers that have been defined in the “Create Work Center” activity of the “Work Center” business component. |
The system displays the following field on clicking the “Create FCD” pushbutton:
|
Work Center Description |
The textual description of the work center. |
Enter the following fields:
|
Est. Elapsed Time |
The total time estimated for completing the FCD (Decimal). Mandatory. Ensure that the number entered in this field is positive. Use the drop-down list box provided alongside, to specify the unit of measurement for the time allotted for the FCD. The system displays the options “Minutes”, “Hours” and “Days”, and sets the field to “Hours” by default. |
|
Est. Man Hrs. |
The total man-hours estimated for “Skill” type resources to complete the FCD (Decimal). Mandatory. Ensure that the number entered in this field is positive. |
|
On Wing |
Check this box to indicate that the change can be performed when the part is fitted to the aircraft. |
|
Follow-Up Action Reqd. |
Check this box to indicate the follow-up action is required after performing the FCD. |
Enter the following field in the "Document Attachment Details" group box:
|
File Name |
The name of the file that you wish to attach to the FCD (Alphanumeric, 50). This can be the document that contains information regarding FCD creation or any other document with respect to FCD. |
Select the “View File” link along side to view the file details.
Click the “Create FCD” pushbutton, to create the fleet campaign directive.
If you have chosen automatic generation of the FCD number, the system generates the number with the prefix and suffix of the numbering type selected. The number is incremented by one from the last number available in the "Engineering document" business component.
For the FCD generated, the system assigns “Fresh” status.
Note: This action is workflow-enabled. Notification messages can be sent as per the settings you have defined in the "Workflow Management" business component.
To proceed, carry out the following
Select the “Edit Aircraft Effectivity” link at the bottom of the page, to enter the aircraft effectivity details for the FCD.
Select the “Edit Part Effectivity” link at the bottom of the page, to enter the part effectivity details of the FCD.
Select the “Edit References” link at the bottom of the page, to modify the reference documents that are needed for executing the FCD.
Select the “Edit Parts Requirements” link at the bottom of the page, to enter the details of the parts required for FCD execution.
Select the “Edit Resource Requirements” link at the bottom of the page, to enter the details of the resources required for FCD execution.
Select the “Edit Schedules Information” link at the bottom of the page, to edit the periodicity details for the FCD.
Select the “Edit Notes” link at the bottom of the page, to modify the additional notes for the FCD.
Select the “Edit FCD” link at the bottom of the page, to modify the FCD details.
Select the “Edit Task Information” link at the bottom of the page, to enter the details of the tasks to be performed for FCD execution.
Select the “Prepare Aircraft Mod Plan” link to enter the aircraft schedule details in aircraft modification plan.
Select the “Prepare Component Mod Plan” link to enter the component schedule details in component modification plan.
This page enables you to create the Fleet Campaign Directive (FCD), to communicate a minor engineering change that does not involve configuration changes, or revisions to approved tasks. A unique number identifies the fleet campaign directive (FCD). Based on the option settings, the system either generates the FCD number automatically, or enables you to enter it manually. To generate the number automatically, you must specify the numbering type in this page.
You can specify the category to which the FCD belongs, user status, description and the ATA chapter to indicate the system on which the FCD has to be performed.
The reference document details such as the Modification Committee Meeting number, date on which the MCM was convened, Maintenance Change Request (MCR) number, revision number of the MCR and the source document type can be specified.
You can specify whether the FCD is applicable for the aircraft, component or engine. You can assign a priority for the FCR and enter the background details and reason for generating the FCD.
The execution details of the FCD, such as the work center in which the FCD must be performed, estimated time and man-hours required for the execution of the FCD, must also be defined.
You can also indicate whether,
the FCD has to be performed in the original place of the part, and
follow-up action is required after executing the FCD.
You can also specify the name of the file that contains the details of the FCD or any other document pertaining to the FCD.
The system assigns the “Fresh” status as soon as the FCD is created, and sets the creation date and time to the server date and time
Note: If approval requirements are specified in the “Set Authorization Rules” activity, for the combination of the change document type and the source document type of the FCD, the system sets the “Authorization Status” of the FCD as “Pending” in the "Edit FCD" activity. Otherwise, the “Authorization Status” is set as “Authorization Not Required”.
Create FCDs applicable for aircraft, engine or component
Specify the reference document details for FCD
Create FCDs applicable for aircraft, engine or component
You can create FCDs applicable for aircraft, engine or component.
In the “FCD Details” group box,
Set the “Applicability” field to “Aircraft”, if the FCD must be executed on aircraft.
Set the “Applicability” field to “Engine”, if the FCD must be executed on engine.
Set the “Applicability” field to “Component”, if the FCD must be executed on component.
Specify the reference document details for FCD
The details of the reference documents that triggered the creation of FCD, can be entered.
In the “Reference Document Details” group box,
Enter the MCR number and the corresponding revision number in the “MCR #” and “Revision #” fields.
Select the appropriate source document type in the “Source Doc Type” drop-down list box.
You can specify the following details based on which FCD execution will take place:
Check the "On-wing" box in the “FCD Execution Details” group box, if you wish to perform the engineering change when the part is fitted to the aircraft.
Check the “Follow-Up Action” box in the “FCD Execution Details” group box, to indicate that follow-up action is required after executing the FCD.
Priority is a number identifying the level of urgency. For example, in a set of priority numbers 1, 2, 3 and 4, the priority number “1” will be treated as of highest priority. You can specify the priority based on which the FCD will be executed.
Select the priority number in the “Priority” drop-down list box, in the “FCD Details” group box.