Modifying Supplementary Details tab

Select the “Supplementary Details” tab in the "Edit Main Information" page.
Modify the following fields in the “OEM Details” group box, if necessary.

Manufacturer Part #	The number given by the manufacturer of the part (Alphanumeric, 40). The manufacturer uses this number as reference.
Manufacturer #	The code identifying the manufacturer of the part (Alphanumeric, 45).
	Help facility available.

The system displays the following fields:

Manufacturer Name	The name of the manufacturer
SPEC 2000 Code	The code by which the manufacturer is identified in SPEC 2000.
CAGE #	The Commercial and Government Entity code (CAGE) assigned to the manufacturer
NSCM #	The NATO Supply Code for Manufacturer number (NSCM) assigned to the manufacturer

Note: For parts of type “Component”, either “CAGE#” or “NSCM#” must be entered.

Modify the following fields in the “Design Details” group box.

Previous Part #

The number given to the part previously (Alphanumeric, 40)

Help facility available.

The system displays the following field:

Base Part #	The number identifying the base part
	The base part number is identified as an attribute of the Part number to track the changes of a given Part number due to engineering modifications. The use of base part number enables us to keep track of changes made to the part number without altering the initial part number. For details, refer the summary of the activity.

Enter the following fields:

Mod Status #

The status number assigned to a part, whenever its properties are enhanced (Alphanumeric, 15). The latest status number of the part is considered during the purchase activity.

Prime Part #

The number identifying the prime part (Alphanumeric, 40)

The prime part number is an attribute of the part number that enables to retrieve a set of alternate parts for a defined part number.

Help facility available.

Note: If the part number entered in this field is not same as the part number entered in the “Part Identification Details” group box, then ensure that the prime part entered is in “Active” reference and planning status as identified in the “Part Administration” business component.

Note: If the “Prime Part #” field is left blank, the part number in the “Part #” field of “Part Identification Details” group box is updated as prime part number.

Drawing Reference/ Revision #	The number identifying the document containing the drawing reference (Alphanumeric, 40). The revision number of the drawing document.
Material Specification	The specification of the material composition of the part (Alphanumeric, 255).
Source Document Type	Use the drop-down list box to select the type of the reference document based on which the part number is being created.
	IPC – indicates that the reference document is an Illustrated Parts catalogue.
	Eng. Doc– indicates that the reference document is an Engineering document.
	Others – indicates that the reference document could be any document other than “IPC” and “Eng. Doc”.
	The system displays “IPC” by default. This field is mandatory if the Source Document # is entered.
Document Revision #	The revision number of the source document (Alphanumeric, 40).
Source Document #	The number identifying the reference document (Alphanumeric, 40). The system ensures that a value exists in this field, if the option "Source document information for a Part" is set as "Mandatory" in the “Logistics Common Master” business component.
Source Document Date	The date on which the reference document was created. This field is mandatory if the Source Document # is entered. The system ensures that the entered date is lesser than or equal to current date.

Modify the following fields in the “Ref. Doc. Details” group box.

Ref. Doc. Type

Use the drop-down list to select the type of the reference document. The system lists all the document type that is defined in the “Create Reference Document Type” activity of the “Common Master” component.

This field is mandatory if a value exists in the Reference Document # field.

By default, the system displays the last saved value. Else, leaves the field blank.

Ref. Doc. #

The number identifying the reference document (Alphanumeric, 40).

This field is mandatory if a value exists in the Reference Document Type field.

Ref. Notes

Any other reference notes pertaining to the reference document for the part (Alphanumeric, 2000).

Modify the following fields in the “Physical Data” group box.

Gross Volume

The gross volume of the part (Decimal). The gross volume must be greater than zero.

Note: This field must not be left blank, if the “Volume UOM” field is entered.

Volume UOM	The unit of measurement in which the volume of the part is measured (Alphanumeric, 10). The UOM must be defined in the “Create UOM” activity of the “Unit of Measurement Administration” business component and must be in “Active” status.
	Help facility available.

Note: This field must not be left blank, if the “Gross Volume” field is entered.

Note: If the volume UOM is entered and different from Stock UOM, then ensure that conversion between “Volume UOM” and “Stock UOM” is defined for the part in the “Maintain UOM Conversion” page of the current business component or in the “Unit Of Measurement Administration” business component.

Gross Weight

The gross weight of the part (Decimal). The gross weight must be greater than zero.

Note: This field must not be left blank, if the “Weight UOM” field is entered.

Weight UOM	The unit of measurement in which the part is weighed (Alphanumeric, 10). The UOM must be defined in the “Create UOM” activity of the “Unit of Measurement Administration” business component and must be in “Active” status.
	Help facility available.

Note: This field must not be left blank, if the “Gross Weight” field is entered.

Note: If the weight UOM is entered, and different from stock UOM then ensure that conversion between “Weight UOM” and “Stock UOM” for the part is defined in the “Maintain UOM Conversion” page of the current business component or in the “Unit Of Measurement Administration” business component.

Length

The length of the part. The length must be greater than zero.

Note: This field must not be left blank, if the “Length UOM” field is entered

Length UOM

The unit of measurement in which the length of the part is measured. The UOM must be defined in the “Create UOM” activity of the “Unit of Measurement Administration” business component and must be in “Active” status.

Help facility available.

Note: This field must not be left blank, if the “Length” field is entered.

Width

The width of the part. The width must be greater than zero.

Note: This field must not be left blank, if the “Width UOM” field is entered.

Width UOM

The unit of measurement in which the width of the part is measured. The UOM must be defined in the “Create UOM” activity of the “Unit of Measurement Administration” business component and must be in “Active” status.

Help facility available.

Note: This field must not be left blank, if the “Width” field is entered.

Height

The height of the part. The height must be greater than zero.

Note: This field must not be left blank, if the “Height UOM” field is entered.

Height UOM

The unit of measurement in which the height of the part is measured. The UOM must be defined in the “Create UOM” activity of the “Unit of Measurement Administration” business component and must be in “Active” status.

Help facility available.

Note: This field must not be left blank, if the “Height” field is entered.

During part creation, if a Material Request document is available for the part, the system ensures the following:

The Stock UOM of the part is same as the Required UOM in the Material Request document, if the Part Control Type is “Serial Controlled” or “Serial and Lot Controlled”.
The part independent UOM conversion exists between the Stock UOM and Required UOM in the Material Request document, if the Part Control Type is “Lot Controlled” or “None Controlled”.

To proceed

Select the “Main Details” tab to modify basic details of parts.