Specifying the parts provided by operator to perform tasks in MCR

This page allows you to define the details of the parts provided by the operator to carry out the task . Tell me more

Select the “Edit Parts Supplied by Operator” link at the bottom of the “Edit Task Information” page.

The “Edit Parts Provided by Operator” page appears.

The system displays the following fields in the “MCR Details” group box:

MCR #	The number identifying the MCR for which the details of the parts provided by the operator must be specified.
Revision #	The revision number of the MCR, if any.
Subject	The textual description of the MCR.
Source Doc Type	The type of the source document to which the MCR belongs.
Applicability Group #	The number identifying the applicability group.
Part Identifier	The identifier of the part as defined in the “Create Maintenance Change Request” page, which could be one of the following:
	Internal - indicates that the MCR must be executed on the part, which is already available with the operator. This internal part is already defined in the "Create Parts Main Information" activity of the "Part Administration" business component.
	Supplier - indicates that the MCR must be executed on the part supplied by the supplier. This part can be a new part or an alternate part that is defined in the "Maintain Alternate Part Nos" activity of the "Part Administration" business component.

Enter the following field in the “Task Details” group box to select the row number of the tasks entered in the “Edit Task Information” page, for which the details of the parts supplied by the operator must be entered:

Line #

Use the drop-down list box to select the row number of the tasks entered in the “Edit Task Information” page, for which the details of the parts supplied by the operator must be entered. The system lists all the row numbers of the tasks defined for the applicability group

Click the “Get Details” pushbutton.

The system displays the following fields:

Task #	The task entered in the previous page, in the selected row.
Revision #	The revision number of the task.
Task Description	The textual description of the task.

Enter the following field:

Default Stock UOM

Check this box if you wish to specify the stock UOM for the part numbers. If this box is checked the system saves the stock UOM defined for the part in the “Part Administration” business component on clicking the “Edit Configuration Change Information” pushbutton.

The system displays the multiline fields if the details have already been defined for the task:

Enter the following fields in the “Part Details” multiline to add parts provided by the operator:

Part #	The number identifying the part provided by the operator (Alphanumeric, 40). Mandatory.
Part Description	The textual description of the part (Alphanumeric, 150). Data entry in this field is mandatory if the part is not already defined in the “Part” business component.

Note: For an internal part that has already been defined, if you have not entered the description, the system fills in the description and the UOM for the part from the “Part Administration” business component, on clicking the “Edit Part Details” pushbutton. For a part supplied by the supplier, the system fills in the description and UOM of the equivalent part number defined in the “Part Administration” business component. If the part supplied is new, entry of part description is mandatory.

UOM	Use the drop-down list box to select the unit of measurement for the part. The system lists all the active UOM codes defined in the “UOM” business component. Selection of value in this field is mandatory if you have entered the part number or quantity and not checked the “Default Stock UOM” box.
Quantity	The number of parts estimated for carrying out the task (Decimal). Mandatory.

Check the box in the “Select” column of the multiline to mark the part for deletion.
Click the Delete icon in the tool bar above the multiline, to delete the parts selected in the multiline.
Click the “Edit Parts” pushbutton to update the part details.

Specifying the parts provided by operator to perform tasks in MCR – An overview

The task requirement details or the details of the parts provided by the operator to carry out the task can be defined in this page. You can enter the details with respect to the tasks entered in the “Edit Task Information” page. You can specify the part number, its description, the unit of measurement for the part and the resource group that would execute the task. You are also provided with the option of specifying the default Stock UOM defined for the parts in the “Part Administration” business component.

What you can do in this page

Specify the parts provided by the operator for MCR

You can specify the parts supplied by the operator for executing the MCR. The part details can be entered with respect to the task.

Select the line number of the task in the “Line #” drop-down list box.
Enter the part details for the task in the “Sub-Task Details” multiline.