Replacing components

Select the “Part Attach / Remove tab in the Parts Hub page.

Retrieving component replacements based on task status

Click the icon to retrieve component replacement tasks from package based on task status.

The filter cards display the breakup of the Component Removal tasks based on the exception status as illustrated below:

All	Shows the total count of the Component Removal tasks in all statuses. Click the filter to view these tasks in the multiline.
Pending	Show the count of the Component Removal tasks in the status other than ‘‘Completed’. Click the filter to view these tasks in the multiline.
Removed	Show the count of the Component Removal tasks wherein the component was removed. Click the filter to view these tasks in the multiline.
Replaced	Show the count of the Component Removal tasks wherein the component was attached. Click the filter to view these tasks in the multiline.
Others	Show the count od Component Removal tasks wherein the component was Click the filter to view these tasks in the multiline.

Retrieving component replacements based on exception

Click the icon to retrieve component replacement tasks from package based on exception

The filter cards display the breakup of the Component Removal tasks in the package based on the exception status as illustrated below:

All	The total count of Component Removal tasks in the package.
Rem. But Not Att.	The count of the Component Replacement transactions wherein the component has been removed but not replaced yet
Force Part Change	The count of component replacement tasks with Record Option as ‘Force Part Change’.
Part Not Issued	The count of component replacement tasks wherein the removed component was not returned to warehouse or routed to work center for maintenance or repair.
Part Routed	The count of component replacement tasks wherein the removed component was routed to the designated work center.

Retrieving component removal tasks based on specific criteria

Click the icon to retrieve component replacement tasks from package based on exception

The filter cards display the breakup of the Component Removal tasks based on the exception status as illustrated below:

Search By	Use the drop-down list box to select the basis for retrieving the component removal task. The drop-down list box displays the following: Attached Part #, Attached Serial #, Removed Part # and Removed Serial #.
Show Replaced	Select the check box to retrieve

Click the “Go” push button.
Click the icon to retrieve component replacement tasks from package based on specific search

Processing component replacements

The multiline displays the following details for the tasks:

Error

The Error code, if the component replacement task has encountered an error.

Indicates the status of the Component Replacement transaction by means of color code:

Red – Failed
Orange – Force Part Change
Green – Closed / Completed

Enter the following in the multiline.

Source Task/Discrepancy #	The task or discrepancy that necessitated the component replacement Help facility available
Tracking #	The code identifying the log leaf which contains the component replacement details.
Action	Use the drop-down list box to specify the action to be performed on the removed component. The system displays the following option: “Overhaul”, “Inspection”, “Repair”, “Discard”, “Rework”, “Back to Owner”.
Object Type	Use the drop-down list box to specify the type of object being removed. The system displays the following options: “Component”, “Other Parts” and “Miscellaneous”. The system displays “Component” by default.
Rem. Part #	The part that was removed from the NHA. Help facility available
Rem. Serial #	The serial # of the part Help facility available
Rem. Qty	The quantity of the part removed.
Att. Part #	The part attached in place of removed part. Help facility available
Att. Serial #	The serial # of the attached part. Help facility available
Auto Issue?	Check this box to indicate auto issue of installed part to the work center. By default, this box appears checked. Note: This check box will be visible to the user only if ‘Allow Direct Part Consumption?’ option is set as “Yes” for the package type in Define Process Entities activity (Common Master business component) Source is set as “Replace” or “Attach’ Object Type is “Component” / “Other Parts”
Att. Qty.	The quantity of part attached.
A/C Level #	The level code from which the part has been taken for installation. Data entry in this field is mandatory, if the “Record Mode” is set as “Force Part Change” and if ‘Serial # Type’ is set as “New”. Help facility available
A/C Position #	The position code from which the part has been taken for installation. Data entry in this field is mandatory, if the “Record Mode” is set as “Force Part Change” and if ‘Serial # Type’ is set as “New”. Help facility available
Rem. Disposition	Use the drop-down list box to specify the type of work performed on the part being removed. The system lists all the ‘Active’ entities of Entity Type "Disposition Code" for which the process parameter ‘Applicable Document’ is set as "Aircraft Maint. Exec. Ref #" or "Both" and the parameter ‘Initial Disposition ?’ or ‘Final Disposition ?’ is set as "Yes" in the “Define Process Entities” activity of the “Common Master” business component. For offline usage (i.e. ‘Usage Mode’ set as "Offline" in the “Configurator” business component), the following the disposition codes satisfying the following conditions are lot listed in the drop-down: ‘Removed Core Condition’ set as "Phased-Out". ‘Create Order on disposition’ set as "Yes”. 'Recommendation for Phase Out' set as "Yes". Data selection in this field is mandatory, when you save and confirm the component replacement transactions. This check need not be performed for attach-only transaction. Based on the disposition selected in the drop-down list box, the condition of the removed part is displayed alongside, in accordance with the process parameter ‘Removed Core Condition?’ set in the ‘Common Master” business component against the ‘Disposition Code’ entity. The possible values could be “Phased Out”, “Unserviceable” or “Serviceable”.

The multiline displays the following details for the tasks:

Rem. Condition

The condition of the removed part, such as Unserviceable or Phased Out.

Enter the following in the multiline.

Rem. Reason #	Use the drop-down list box to select the reason # relevant for the removal of the part.
Rem. Remarks	Additional information on the component removal or removed part.
Serial # Type	Use the drop-down list to select the serial number type of the removed part. The system lists the options “Existing” and “New”. For offline usage, only “Existing” is listed. By default, the system sets the field as “Existing”. Ensure that this field is set as “New”, if a new serial number must be generated for a serial controlled part. The system does not display the above field, if “Object Type” is selected as “Miscellaneous”.
Rem. MSN #	The manufacturer serial number of the removed part.

The multiline displays the following details for the tasks:

Comp. Repl. #	The number identifying the component replacement.
Status	The status of the component replacement.
Message Center	All error and success messages for the validating the input action by the user.

Saving component replacement details

Select the records that you wish to save in the multiline and then click the “Save as Draft” pushbutton.

Creating component replacement details

Select the records to create component replacement transactions and then click the “Change Part” pushbutton.

Deleting component replacement record

Select the records you want to delete from the multiline and then click the “Delete” pushbutton.