Viewing the parameter information

In this page, you can view the current maintenance parameters for the component on which the repair order has been generated. Tell me more

Select the “View Parameter Information” link at the bottom of the “View Repair Order” page.

Note: This page can be accessed only if the shop job type of the repair order is “Component”.

The “View Parameter Information” page appears.

The system displays the following in the “Component Info” group box:

Repair Order #	The repair order selected in the “Select Repair Order” page.
Status	The status of the repair order which could be one of the following: “Draft”, “Fresh”, “Cancelled”, “Released”, “Issued”, “Acknowledged”, “Quoted”, “Confirmed”, “Authorized”, “Under Auth.”, “Amended” or “BER Closed”.
Part #	The part number of the component on which the repair order has been generated.
Mfr. Part #	The number provided by the manufacturer of the part.
Serial #	The serial number of the component on which the repair order has been generated.
Note: If more than one part is sent for repair, the “Part #” field displays “'Multiple” and serial # is not displayed.
Component #	The number that identifies the component on which the repair order has been generated.
ATA #	The number that identifies the ATA chapter to which the component on which the repair order was generated.

The system displays the following in the “Parameter Info” multiline:

Parameter	The measurable attribute of a component, such as FH /FC (Flight Hours /Flight Cycles), through which the life and maintenance of a component is monitored.
UOM	The unit of measurement, such as hours and cycles, for monitoring the life and maintenance of a component.
Since New	The cumulative flying hours or flying cycles of the component, since it is manufactured.
Since Overhaul	The cumulative flying hours or flying cycles of the component, since its last overhaul in the shop.
Since Repair	The cumulative flying hours or flying cycles of the component, since its last repair in the shop.
Since Inspection	The cumulative flying hours or flying cycles of the component, since its last inspection in the shop.
Since Last Shop Visit	The cumulative flying hours or flying cycles of the component, since its last visit to the shop for maintenance.

Viewing the parameter information – An overview

In this page, you can view the current maintenance parameters for the component on which the repair order has been generated. You can view component parameters, such as the time or cycle since the component was manufactured or underwent maintenance like overhaul, repair and inspection.