Viewing parameter values for the serial numbers

This page allows you to view the parameter values for the part numbers, which are serial number-controlled of the “Component” type.

Select the “View Parameter Information” link at the bottom of the “View Serial Inspection” page.

The “View Parameter Information” page appears.

The system displays the following:

Date Format

The format in which the date fields are displayed in this page. This format is displayed from the “User Preferences” business component based on the login user ID. In case the format is not defined, the system displays the date format from the “Enterprise Modeling” business component by default.

The system displays the following in the “GR Information” group box:

GR #	The number identifying the GR.
Status	The status of the Goods Receipt note (GR).
GR Line #	The line number of the GR.

Enter the following fields in the “GR Information” group box:

Serial #

Use the drop-down list box to select the serial number issued by the supplier for the part. Mandatory. All the serial numbers which have the “Inspected” status and whose “Inspection Result” has been selected as “Accepted” will be available for selection. The system displays “Blank” by default.

Click the “Get Details” pushbutton, to retrieve the part details.

The system displays the following in the “Part Details” group box:

Manufacturer Serial #

The serial number issued by the manufacturer of the part.

The system displays the following in the “Part Details” group box:

Part #	The number identifying the part.
Part Description	The description of the part.
Condition	The condition of the part.

The system displays the following in the “Certificate Details” group box:

Certificate Type	The type of the certificate.
Certificate Date	The date on which the certificate was issued.
Certificate #	A number identifying the certificate.
Authorization #	A number identifying the authorization.
System Tracking Ref #	A unique number, which can be used to track the certification details of the part.

The system displays the following in the “Other Details” group box:

Last Performed Date – TSO	The date on which the overhauling was last performed on the part.
Last Performed Date – TSI	The date on which the inspection was last performed on the part.

The system displays the following in the “Parameter Details” multiline:

Parameter	The parameter associated with the part number.
UOM	The unit of measurement of the parameter.
Unknown ?	Indicates whether the value of the “Since New”, field is known or not known.
Since New	The time in cycles or hours of the component since its manufacture.
Since Overhaul	The cumulative flying hours or flying cycles of the component, since its last overhaul in the shop.
Since Repair	The cumulative flying hours or flying cycles of the component, since its last repair in the shop.
Since Inspection	The cumulative flying hours or flying cycles of the component, since its last inspection.
Since Last Shop Visit	The cumulative flying hours or flying cycles of the component.
Warranty Y/N	The system displays “Yes” or “No” based on the warranty set for the parameter in the “Aircraft” business component.
Warranty Value	The value of the warranty.

The system displays the following fields in the “Warranty Clause” group box:

Under Warranty	Indicates whether the component is covered under warranty agreement or not.
Warranty Category	The category to which the warranty belongs.
Warranty Type	The type of warranty for the part, which could be “OEM” and “New”.
Supplier Part Warranty Agreement #	The number identifying the part warranty agreement by the supplier for the specified part number.
Warranty Begins On	Indicates whether the warranty period begins on the date of receiving the part in the inventory, or on the date of installing the part.
Warranty Start Date	The start date of the warranty period.
Duration	The period for which the warranty is valid.
Remarks	Any remarks pertaining to the warranty of the component.