Viewing usage-based schedule information for work package

In this page you can view the usage-based schedules for the work package. These schedules are dependent on the usage of the component and are based on the consumption parameters of the component. The schedule for the next performance of a work unit will be specified in terms of the value for the consumption parameter.

Select the “View Usage Based Schedule” link at the bottom of the “View Work Package” page.

The “View Usage Based Schedule Information” page appears.

The system displays the following in the “Work Package Details” group box:

Work Package #	The work package number selected in the main page for which the usage-based schedule details have to be viewed.
Work Package Description	The textual description of the work package.
Primary Work Center #	The number identifying the work center where the work package has to be performed.
Work Center Desc	The textual description of the work center.

The system displays the following in the “Usage Based Schedule Details” multiline:

Parameter	A number that identifies the consumption parameter in the aircraft or its component.
UOM	The unit of measurement of the parameter.
Schedule Type	The type of usage-based schedule, which could be “One-Time”, or “Recurring”.
Time Unit	The unit of measurement of time, which could be “Days”, “Weeks”, “Months” or “Years”.
Threshold	The value of the consumption parameter at which the work package is to be carried out.
Interval	The interval in terms of the parameter after which the work package has to be repeated.
Alert Value	The value after which an alert needs to be given on the impending work unit.
Positive Tolerance	The upper limit within which the work unit has to be performed.
Negative Tolerance	The lower limit within which the work unit has to be performed.
Terminating Value	The value after which the maintenance activity cannot be performed on the component.

Note: The system displays the parameter values in the multiline based on the option “Decimal Format” or “HHMM Format” selected for the parameter in “Time Display Option” drop-down list box in the “Aircraft” business component while parameter creation. For e.g. If the Time Display Option is selected as “HHMM Format” and the value stored is 2.50 in the data base, the system displays 2.30 in the multiline.