Viewing the certificate and parameter details of the counted/recounted parts

You can view the certification and parameter details of the counted or recounted parts.

Select the “View Certificate & Parameter Information” link in the “View Serial & Lot Details” page.

The “View Certificate & Parameter Information” page appears.

The system displays the following:

Date Format

The format in which the date fields are displayed in this page. This format is displayed from the "User Preferences" business component based on the login user ID. In case the format is not defined, the system displays the date format from the “Enterprise Modeling” business component by default.

The system displays the following in the “Plan Details” group box:

CC Sheet #	The number identifying the cycle count sheet.
Sheet Description	The textual description of the cycle count sheet.
CC Plan #	The number identifying the cycle count plan.
Plan Description	The textual description of the cycle count plan.
Warehouse #	The number indicating the warehouse for which the cycle count result is entered.
Description	The textual description of the warehouse.

Enter the following in the “Part Selection” group box:

Line #

Use the drop-down list box to select the part that is “Serial Controlled” or “Serial & Lot Controlled” in the specified cycle count sheet, to view the parameter and certificate details.

Note: The system retrieves only those line numbers for which the certificate information is displayed as “Recorded” or “Not Recorded” in the “Edit Serial# / Lot # Information” page.

Click the “Get Details” pushbutton to retrieve the part details.

The system displays the following in the “Part Details” group box:

Part #	The number identifying the part.
Part Description	The textual description of the part.
Serial #	The number identifying the serial number of the part.
Lot #	The number identifying the lot number of the part.
Manufacturer Serial #	The serial number issued by the manufacturer.
Manufacturer Lot #	The lot number issued by the manufacturer.
Condition	The condition of the part, which could be “New”, “Overhauled”, “Serviceable”, “Unserviceable” or “Phased Out”.
Part Control Type	The type of part control, which could be “Serial number controlled” or “Lot number controlled”.

The system displays the following in the “Certificate Details” group box:

Certificate Type	The type of certificate associated with the part serial number or lot number.
Certificate Date	The date on which the certificate was issued.
Certificate #	The number identifying the certificate.
Authorization #	The number identifying the authorization of the part.
System Tracking Ref #	The number, which can be used to track the certification details of the component.
Warranty Lapse Date	The date on which the warranty of the part gets lapsed.

The system displays the following in the “Parameter Details” multiline:

Parameter	The parameter associated to the part number.
UOM	The unit of measurement of the parameter.
Since New	Indicates the time, in cycles or hours, if the part is new or if the part has been acquired from another organization that has held the part in stock without using it.
Since Overhaul	Indicates the time, in cycles or hours, if the part has undergone a maintenance action but has not been used thereafter.
Since Repair	The cumulative flying hours or flying cycles of the component, since its last repair in the shop
Since Inspection	The cumulative flying hours or flying cycles of the component, since its last inspection in the shop
Since Last Shop Visit	The cumulative flying hours or flying cycles of the component, since its last visit to the shop for maintenance
Warranty Y/N	Indicates whether the part is covered under warranty or not, based on the warranty set for the parameters in the “Aircraft” business component.
Warranty Value	The value of the warranty.

The system displays the following in the "Attachments" group box:

File Name

The name of the file used for document reference that is associated to the certificate and parameter information.