Viewing Supplementary Details tab

The system displays the following in the “OEM Details” group box:

Manufacturer Part #	The number given by the manufacturer of the part.
Manufacturer #	The code identifying the manufacturer of the part.
Manufacturer Name	The name of the manufacturer.
SPEC 2000 Code	The code by which the manufacturer is identified in SPEC 2000.
CAGE #	The “Commercial and Government Entity” code (CAGE) assigned to the manufacturer.
NSCM #	The “NATO Supply code for Manufacturer” number (NSCM) assigned to the manufacturer.

The system displays the following in the “Design Details” group box:

Previous Part #	The previous part number.
Prime Part #	The number identifying the prime part of the part, for which the details are displayed.
Base Part #	The base part number of the part. This is the initial part number before the part undergoes any modifications and is used to track the changes of a given part number due to engineering modifications.
Mod Status #	The number identifying the status assigned to a part, whenever its properties are enhanced.
Drawing Reference/ Revision #	The number identifying the drawing reference document. The revision number of the drawing document.
Material Specification	The specification of the material composition of the part.
Source Document Type	The type of the source document.
	IPC – indicates that the reference document is an Illustrated Parts catalogue.
	Eng. Doc– indicates that the reference document is an Engineering document.
	Others – indicates that the reference document could be any document other than “IPC” and “Eng. Doc”.
Source Document #	A number identifying the source document.
Document Revision #	The revision number of the source document.
Source Document Date	The date on which the reference document was created.

The system displays the following in the “Ref. Doc. Details” group box.

Ref. Doc. Type	The type of the reference document.
Ref. Doc. #	The number identifying the reference document.
Ref. Notes	Any other reference notes pertaining to the reference document.

The system displays the following in the “Physical Data” group box:

Gross Volume	The gross volume of the part.
Volume UOM	The unit of measurement in which the volume of the part is measured.
Gross Weight	The gross weight of the part.
Weight UOM	The unit of measurement in which the part is weighed.
Length	The length of the part.
Length UOM	The unit of measurement in which the length of the part is measured.
Width	The width of the part.
Width UOM	The unit of measurement in which the width of the part is measured.
Height	The height of the part.
Height UOM	The unit of measurement in which the height of the part is measured.

To proceed