Viewing summary parameter details

This page allow you to view summary parameter details.

Select the “Summary Parameter Details” tab from the “View Journey Log” to view summary parameter details.

The “Summary Parameter Details” tab page appears:

The system displays the following fields in the “Summary Parameters Details” multiline:

Parameter Description	The description of the parameter.
Parameter	The parameter name.
Parameter Value	The value of the parameter.
UOM	The unit of measurement of the parameter.
Update Mode	The mode in which the parameter value is updated. The mode of updation could be of updated “Delta” or “New”.
Current Value	The present value of the parameter.
Resultant Value	The final value of the parameter considering the parameter value recorded in the journey log, which would increase or get replaced depending upon the update mode specified.
Part #	The number identifying the part fitted in the position code.
Part Description	The description of the part.
Position Code	The code identifying the position in the aircraft.
Position Type	The type of the position code, which could be “Engine” or “APU”.
Parameter Type	The type of parameter.

To proceed, carry out the following:

Select the “Leg Details” tab in the view journey log page.

Viewing journey log details – An overview

In this page, you can view the journey log information. The journey log details such as the journey log number, status, flight date, reporting time zone, starting station, journey log category, tech log number and flight category, can be viewed.

You can also view the following details of the journey log:

The aircraft details such as the aircraft registration number, aircraft model number, manufacturer serial number, configuration class, total take off for the flight and duration of the flight.
The leg parameter mapping and summary parameter details for the journey log.
The document attachement details such as the name of the file at tached as reference.